Re: [Ardour-users] again maketrouble ...

New Message About this list Date view Thread view Subject view Author view Attachment view

From: Jesse Chappell (jesse_at_essej.net)
Date: 05/02/03 13:17 EDT

  • Next message: Jesse Chappell: "Re: [Ardour-users] ksi_ardour. can't shake it off" 
    Subject: Re: [Ardour-users] again maketrouble ...
From: Jesse Chappell <jesse@essej.net>
Message-Id: <e915cd9585d84cd9d7c20775f9a00e6e@essej.net>
Date: Fri, 02 May 2003 13:17:13 -0400

OK, the usual suspects for this problem are (described in the
README):

 * make sure you have installed gettext-0.11.5 or above.

 * make sure you set an ACLOCAL_FLAGS properly, as discussed in
the README.

From the error messages (very well hidden in the garbage output
:) one or both of these is the problem.

jlc

:

 > Hi, thanks for the reply, Actually at this point I don't know how to
 > continue but I really want Ardour working... So this is why I'm sending the whole
 > autogen, configure and make process on my iBook running Yellowdog 2.3- Linux...
 > The output file is attached.
 > 
 > I hope you have an idea. Thank you very,very much in advance
 > 
 


-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
_______________________________________________
Ardour-users mailing list
Ardour-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/ardour-users
  • Next message: Jesse Chappell: "Re: [Ardour-users] ksi_ardour. can't shake it off"
    New Message About this list Date view Thread view Subject view Author view Attachment view

    This archive was generated by hypermail 2.1.6 : 05/02/03 13:45 EDT