[RFC] Packet-Shaping-HOWTO

From: Martijn van Oosterhout (kleptog@cupid.suninternet.com)
Date: Sat Mar 25 2000 - 10:28:12 EST

  • Next message: Andrew Morton: "Re: eepro100.c"

    Hello people,

    Recently I've had occasion to try to make the QoS and queueing
    code from the 2.2 kernel to work for me, but found the
    documentation to be a bit technical and not really aimed for
    users. So, I've summed up my experience with the packet
    shaping and stuffed it all into a HOWTO.

    However some of it is still guess work since there are some
    concepts going on here that I still don't get. No matter,
    I would just like people to read over it to see if I got
    it right.

    Note that this is specifically 2.2, I don't know if
    2.[34] is the same.

    http://cupid.suninternet.com/~kleptog/Packet-Shaping-HOWTO.html

    Please CC any replies. 

    -- 
Martijn van Oosterhout <kleptog@cupid.suninternet.com>

    -
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/

    This archive was generated by hypermail 2b29 : Sat Mar 25 2000 - 10:32:06 EST