Linux version 2.2.15pre14 (root@iq.rulez.org) (gcc version egcs-2.91.66 19990314/Linux (egcs-1.1.2 release)) #3 SZO MÁR 25 20:52:26 CET 2000 Detected 400920293 Hz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 799.54 BogoMIPS Memory: 257408k/262144k available (1244k kernel code, 412k reserved, 3008k data, 72k init) Dentry hash table entries: 32768 (order 6, 256k) Buffer cache hash table entries: 262144 (order 8, 1024k) Page cache hash table entries: 65536 (order 6, 256k) VFS: Diskquotas version dquot_6.4.0 initialized CPU: Intel Celeron (Mendocino) stepping 00 Checking 386/387 coupling... OK, FPU using exception 16 error reporting. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.35a (19990819) Richard Gooch (rgooch@atnf.csiro.au) PCI: PCI BIOS revision 2.10 entry at 0xfb3e0 PCI: Using configuration type 1 PCI: Probing PCI hardware Linux NET4.0 for Linux 2.2 Based upon Swansea University Computer Society NET3.039 NET4: Unix domain sockets 1.0 for Linux NET4.0. NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP TCP: Hash tables configured (ehash 262144 bhash 65536) NET4: Linux IPX 0.38 for NET4.0 IPX Portions Copyright (c) 1995 Caldera, Inc. Initializing RT netlink socket Starting kswapd v 1.5 usb.c: registered new driver hub mousedev: PS/2 mouse device on misc32 usb.c: registered new driver hid uhci.c: version v0.9 time 20:36:41 Mar 25 2000<6>usb.c: new USB bus registered, assigned bus number 1 usb.c: USB new device connect, assigned device number 1 usb.c: kmalloc IF cfff9460, numif 1 usb.c: error getting string descriptor 0 (error=-32) usb.c: USB device number 1 default language ID 0x0 hub.c: USB hub found<6>hub.c: 2 ports detected hub.c: ganged power switching<7>hub.c: standalone hub<7>hub.c: global over-current protection<7>hub.c: power on to power good time: 2ms hub.c: hub controller current requirement: 0mA hub.c: port 1 is removable hub.c: port 2 is removable hub.c: local power source is good hub.c: no over-current condition exists hub.c: enabling power on all ports<7>usb.c: usb-bandwidth-alloc: was: 0, new: 17, bustime = 17 us, Pipe allowed: yes usb.c: bw_alloc bumped to 17 for 1 requesters usb.c: hub driver claimed interface cfff9460 Length = 18 DescriptorType = 01 USB version = 1.00 Vendor:Product = 0000:0000 MaxPacketSize0 = 8 NumConfigurations = 1 Device version = 0.00 Device Class:SubClass:Protocol = 09:00:00 Hub device class Configuration: bLength = 9 bDescriptorType = 02 wTotalLength = 0019 bNumInterfaces = 01 bConfigurationValue = 01 iConfiguration = 00 bmAttributes = 40 MaxPower = 0mA Interface: 0 Alternate Setting: 0 bLength = 9 bDescriptorType = 04 bInterfaceNumber = 00 bAlternateSetting = 00 bNumEndpoints = 01 bInterface Class:SubClass:Protocol = 09:00:00 iInterface = 00 Endpoint: bLength = 7 bDescriptorType = 05 bEndpointAddress = 81 (in) bmAttributes = 03 (Interrupt) wMaxPacketSize = 0008 bInterval = ff matroxfb: Matrox Millennium G200 (AGP) detected matroxfb: MTRR's turned on matroxfb: 640x480x8bpp (virtual: 640x13100) matroxfb: framebuffer at 0xE0000000, mapped to 0xd0805000, size 8388608 Console: switching to colour frame buffer device 80x30 fb0: MATROX VGA frame buffer device Detected PS/2 Mouse Port. Serial driver version 4.27 with no serial options enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A pty: 256 Unix98 ptys configured apm: BIOS version 1.2 Flags 0x07 (Driver version 1.12) Real Time Clock Driver v1.09 loop: registered device at major 7 Uniform Multi-Platform E-IDE driver Revision: 6.30 ide: Assuming 40MHz system bus speed for PIO modes; override with idebus=xx PIIX4: IDE controller on PCI bus 00 dev 39 PIIX4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:pio CMD648: IDE controller on PCI bus 00 dev 78 CMD648: not 100% native mode: will probe irqs later hda: WDC AC420400D, ATA DISK drive hdb: CD-ROM CDU701, ATAPI CDROM drive hdc: SAMSUNG SV1824D, ATA DISK drive hde: WDC WD68BA, ATA DISK drive ide: Assuming 40MHz system bus speed for PIO modes; override with idebus=xx hdg: WDC AC420400D, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 ide2 at 0xdc00-0xdc07,0xe002 on irq 11 ide3 at 0xe400-0xe407,0xe802 on irq 11 hda: WDC AC420400D, 19470MB w/1966kB Cache, CHS=39560/16/63, UDMA(33) hdc: SAMSUNG SV1824D, 17386MB w/472kB Cache, CHS=35324/16/63, UDMA(33) hde: WDC WD68BA, 6516MB w/1961kB Cache, CHS=13240/16/63 hdg: WDC AC420400D, 19470MB w/1966kB Cache, CHS=39560/16/63 hub.c: port 2 connection change hdb: ATAPI 14X CD-ROM drive, 128kB Cache, DMA Uniform CDROM driver Revision: 2.56 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 md driver 0.90.0 MAX_MD_DEVS=256, MAX_REAL=12 raid0 personality registered raid1 personality registered raid5 personality registered raid5: measuring checksumming speed raid5: MMX detected, trying high-speed MMX checksum routines pII_mmx : 891.921 MB/sec p5_mmx : 936.879 MB/sec 8regs : 688.467 MB/sec 32regs : 385.953 MB/sec using fastest function: p5_mmx (936.879 MB/sec) md.c: sizeof(mdp_super_t) = 4096 Partition check: hda:<7>hub.c: portstatus 301, change 0, Low Speed hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 > hdc: hdc1 hde: hde1 hde2 hde3 hde4 < hde5 hde6 hde7 hde8 > hdg: hdg1 hdg2 hdg3 hdg4 < hdg5 hdg6 hdg7 hdg8 > autodetecting RAID arrays (read) hda1's sb offset: 204992 [events: 00000039] (read) hda3's sb offset: 1048704 [events: 000001cb] (read) hda5's sb offset: 76992 [events: 000001ad] (read) hda6's sb offset: 255936 [events: 000001a8] (read) hda7's sb offset: 225152 [events: 00000095] (read) hda8's sb offset: 18022912 [events: 00000031] (read) hdc1's sb offset: 17803200 [events: 00000031] (read) hde1's sb offset: 204992 [events: 00000039] (read) hde3's sb offset: 1048704 [events: 000001cb] (read) hde5's sb offset: 76992 [events: 000001ad] (read) hde6's sb offset: 255936 [events: 000001a8] (read) hde7's sb offset: 225152 [events: 00000095] (read) hde8's sb offset: 4757632 [events: 00000031] (read) hdg1's sb offset: 204992 [events: 00000039] (read) hdg3's sb offset: 1048704 [events: 000001cb] (read) hdg5's sb offset: 76992 [events: 000001ad] (read) hdg6's sb offset: 255936 [events: 000001a8] (read) hdg7's sb offset: 225152 [events: 00000095] (read) hdg8's sb offset: 18022912 [events: 00000031] autorun ... considering hdg8 ... adding hdg8 ... adding hde8 ... adding hdc1 ... adding hda8 ... created md5 bind bind bind bind running: now! hdg8's event counter: 00000031 hde8's event counter: 00000031 hdc1's event counter: 00000031 hda8's event counter: 00000031 mask ffffffe0 rdev->size: 18022912 masked rdev->size: 18022912 new md_size: 18022912 rdev->size: 4757632 masked rdev->size: 4757632 new md_size: 22780544 rdev->size: 17803200 masked rdev->size: 17803200 new md_size: 40583744 rdev->size: 18022912 masked rdev->size: 18022912 new md_size: 58606656 md5: max total readahead window set to 512k md5: 4 data-disks, max readahead per data-disk: 128k raid0: looking at hdg8 raid0: comparing hdg8(18022912) with hdg8(18022912) raid0: END raid0: ==> UNIQUE raid0: 1 zones raid0: looking at hde8 raid0: comparing hde8(4757632) with hdg8(18022912) raid0: NOT EQUAL raid0: comparing hde8(4757632) with hde8(4757632) raid0: END raid0: ==> UNIQUE raid0: 2 zones raid0: looking at hda8 raid0: comparing hda8(18022912) with hdg8(18022912) raid0: EQUAL raid0: looking at hdc1 raid0: comparing hdc1(17803200) with hdg8(18022912) raid0: NOT EQUAL raid0: comparing hdc1(17803200) with hde8(4757632) raid0: NOT EQUAL raid0: comparing hdc1(17803200) with hda8(18022912) raid0: NOT EQUAL raid0: comparing hdc1(17803200) with hdc1(17803200) raid0: END raid0: ==> UNIQUE raid0: 3 zones raid0: FINAL 3 zones zone 0 checking hdg8 ... contained as device 0 (18022912) is smallest!. checking hde8 ... contained as device 1 (4757632) is smallest!. checking hda8 ... contained as device 2 checking hdc1 ... contained as device 3 zone->nb_dev: 4, size: 19030528 current zone offset: 4757632 zone 1 checking hdg8 ... contained as device 0 (18022912) is smallest!. checking hde8 ... nope. checking hda8 ... contained as device 1 checking hdc1 ... contained as device 2 (17803200) is smallest!. zone->nb_dev: 3, size: 39136704 current zone offset: 17803200 zone 2 checking hdg8 ... contained as device 0 (18022912) is smallest!. checking hde8 ... nope. checking hda8 ... contained as device 1 checking hdc1 ... nope. zone->nb_dev: 2, size: 439424 current zone offset: 18022912 done. raid0 : md_size is 58606656 blocks. raid0 : conf->smallest->size is 439424 blocks. raid0 : nb_zone is 134. raid0 : Allocating 1072 bytes for hash. md: updating md5 RAID superblock on device hdg8 [events: 00000032](write) hdg8's sb offset: 18022912 hde8 [events: 00000032](write) hde8's sb offset: 4757632 hdc1 [events: 00000032](write) hdc1's sb offset: 17803200 hda8 [events: 00000032](write) hda8's sb offset: 18022912 . considering hdg7 ... adding hdg7 ... adding hde7 ... adding hda7 ... created md4 bind bind bind running: now! hdg7's event counter: 00000095 hde7's event counter: 00000095 hda7's event counter: 00000095 mask ffffffe0 rdev->size: 225152 masked rdev->size: 225152 new md_size: 225152 rdev->size: 225152 masked rdev->size: 225152 new md_size: 450304 rdev->size: 225152 masked rdev->size: 225152 new md_size: 675456 md4: max total readahead window set to 384k md4: 3 data-disks, max readahead per data-disk: 128k raid0: looking at hdg7 raid0: comparing hdg7(225152) with hdg7(225152) raid0: END raid0: ==> UNIQUE raid0: 1 zones raid0: looking at hde7 raid0: comparing hde7(225152) with hdg7(225152) raid0: EQUAL raid0: looking at hda7 raid0: comparing hda7(225152) with hdg7(225152) raid0: EQUAL raid0: FINAL 1 zones zone 0 checking hdg7 ... contained as device 0 (225152) is smallest!. checking hde7 ... contained as device 1 checking hda7 ... contained as device 2 zone->nb_dev: 3, size: 675456 current zone offset: 225152 done. raid0 : md_size is 675456 blocks. raid0 : conf->smallest->size is 675456 blocks. raid0 : nb_zone is 1. raid0 : Allocating 8 bytes for hash. md: updating md4 RAID superblock on device hdg7 [events: 00000096](write) hdg7's sb offset: 225152 hde7 [events: 00000096](write) hde7's sb offset: 225152 hda7 [events: 00000096](write) hda7's sb offset: 225152 . considering hdg6 ... adding hdg6 ... adding hde6 ... adding hda6 ... created md3 bind bind bind running: now! hdg6's event counter: 000001a8 hde6's event counter: 000001a8 hda6's event counter: 000001a8 md3: max total readahead window set to 512k md3: 2 data-disks, max readahead per data-disk: 256k raid5: device hdg6 operational as raid disk 0 raid5: device hde6 operational as raid disk 1 raid5: device hda6 operational as raid disk 2 raid5: allocated 3197kB for md3 raid5: raid level 5 set md3 active with 3 out of 3 devices, algorithm 2 RAID5 conf printout: --- rd:3 wd:3 fd:0 disk 0, s:0, o:1, n:0 rd:0 us:1 dev:hdg6 disk 1, s:0, o:1, n:1 rd:1 us:1 dev:hde6 disk 2, s:0, o:1, n:2 rd:2 us:1 dev:hda6 disk 3, s:0, o:0, n:0 rd:0 us:0 dev:[dev 00:00] disk 4, s:0, o:0, n:0 rd:0 us:0 dev:[dev 00:00] disk 5, s:0, o:0, n:0 rd:0 us:0 dev:[dev 00:00] disk 6, s:0, o:0, n:0 rd:0 us:0 dev:[dev 00:00] disk 7, s:0, o:0, n:0 rd:0 us:0 dev:[dev 00:00] disk 8, s:0, o:0, n:0 rd:0 us:0 dev:[dev 00:00] disk 9, s:0, o:0, n:0 rd:0 us:0 dev:[dev 00:00] disk 10, s:0, o:0, n:0 rd:0 us:0 dev:[dev 00:00] disk 11, s:0, o:0, n:0 rd:0 us:0 dev:[dev 00:00] RAID5 conf printout: --- rd:3 wd:3 fd:0 disk 0, s:0, o:1, n:0 rd:0 us:1 dev:hdg6 disk 1, s:0, o:1, n:1 rd:1 us:1 dev:hde6 disk 2, s:0, o:1, n:2 rd:2 us:1 dev:hda6 disk 3, s:0, o:0, n:0 rd:0 us:0 dev:[dev 00:00] disk 4, s:0, o:0, n:0 rd:0 us:0 dev:[dev 00:00] disk 5, s:0, o:0, n:0 rd:0 us:0 dev:[dev 00:00] disk 6, s:0, o:0, n:0 rd:0 us:0 dev:[dev 00:00] disk 7, s:0, o:0, n:0 rd:0 us:0 dev:[dev 00:00] disk 8, s:0, o:0, n:0 rd:0 us:0 dev:[dev 00:00] disk 9, s:0, o:0, n:0 rd:0 us:0 dev:[dev 00:00] disk 10, s:0, o:0, n:0 rd:0 us:0 dev:[dev 00:00] disk 11, s:0, o:0, n:0 rd:0 us:0 dev:[dev 00:00] md: updating md3 RAID superblock on device hdg6 [events: 000001a9](write) hdg6's sb offset: 255936 hde6 [events: 000001a9](write) hde6's sb offset: 255936 hda6 [events: 000001a9](write) hda6's sb offset: 255936 . considering hdg5 ... adding hdg5 ... adding hde5 ... adding hda5 ... created md2 bind bind bind running: now! hdg5's event counter: 000001ad hde5's event counter: 000001ad hda5's event counter: 000001ad md2: max total readahead window set to 512k md2: 2 data-disks, max readahead per data-disk: 256k raid5: device hdg5 operational as raid disk 0 raid5: device hde5 operational as raid disk 1 raid5: device hda5 operational as raid disk 2 raid5: allocated 3197kB for md2 raid5: raid level 5 set md2 active with 3 out of 3 devices, algorithm 2 RAID5 conf printout: --- rd:3 wd:3 fd:0 disk 0, s:0, o:1, n:0 rd:0 us:1 dev:hdg5 disk 1, s:0, o:1, n:1 rd:1 us:1 dev:hde5 disk 2, s:0, o:1, n:2 rd:2 us:1 dev:hda5 disk 3, s:0, o:0, n:0 rd:0 us:0 dev:[dev 00:00] disk 4, s:0, o:0, n:0 rd:0 us:0 dev:[dev 00:00] disk 5, s:0, o:0, n:0 rd:0 us:0 dev:[dev 00:00] disk 6, s:0, o:0, n:0 rd:0 us:0 dev:[dev 00:00] disk 7, s:0, o:0, n:0 rd:0 us:0 dev:[dev 00:00] disk 8, s:0, o:0, n:0 rd:0 us:0 dev:[dev 00:00] disk 9, s:0, o:0, n:0 rd:0 us:0 dev:[dev 00:00] disk 10, s:0, o:0, n:0 rd:0 us:0 dev:[dev 00:00] disk 11, s:0, o:0, n:0 rd:0 us:0 dev:[dev 00:00] RAID5 conf printout: --- rd:3 wd:3 fd:0 disk 0, s:0, o:1, n:0 rd:0 us:1 dev:hdg5 disk 1, s:0, o:1, n:1 rd:1 us:1 dev:hde5 disk 2, s:0, o:1, n:2 rd:2 us:1 dev:hda5 disk 3, s:0, o:0, n:0 rd:0 us:0 dev:[dev 00:00] disk 4, s:0, o:0, n:0 rd:0 us:0 dev:[dev 00:00] disk 5, s:0, o:0, n:0 rd:0 us:0 dev:[dev 00:00] disk 6, s:0, o:0, n:0 rd:0 us:0 dev:[dev 00:00] disk 7, s:0, o:0, n:0 rd:0 us:0 dev:[dev 00:00] disk 8, s:0, o:0, n:0 rd:0 us:0 dev:[dev 00:00] disk 9, s:0, o:0, n:0 rd:0 us:0 dev:[dev 00:00] disk 10, s:0, o:0, n:0 rd:0 us:0 dev:[dev 00:00] disk 11, s:0, o:0, n:0 rd:0 us:0 dev:[dev 00:00] md: updating md2 RAID superblock on device hdg5 [events: 000001ae](write) hdg5's sb offset: 76992 hde5 [events: 000001ae](write) hde5's sb offset: 76992 hda5 [events: 000001ae](write) hda5's sb offset: 76992 . considering hdg3 ... adding hdg3 ... adding hde3 ... adding hda3 ... created md1 bind bind bind running: now! hdg3's event counter: 000001cb hde3's event counter: 000001cb hda3's event counter: 000001cb md1: max total readahead window set to 512k md1: 2 data-disks, max readahead per data-disk: 256k raid5: device hdg3 operational as raid disk 0 raid5: device hde3 operational as raid disk 1 raid5: device hda3 operational as raid disk 2 hub.c: portstatus 303, change 0, Low Speed usb.c: USB new device connect, assigned device number 2 raid5: allocated 3197kB for md1 raid5: raid level 5 set md1 active with 3 out of 3 devices, algorithm 0 RAID5 conf printout: --- rd:3 wd:3 fd:0 disk 0, s:0, o:1, n:0 rd:0 us:1 dev:hdg3 disk 1, s:0, o:1, n:1 rd:1 us:1 dev:hde3 disk 2, s:0, o:1, n:2 rd:2 us:1 dev:hda3 disk 3, s:0, o:0, n:0 rd:0 us:0 dev:[dev 00:00] disk 4, s:0, o:0, n:0 rd:0 us:0 dev:[dev 00:00] disk 5, s:0, o:0, n:0 rd:0 us:0 dev:[dev 00:00] disk 6, s:0, o:0, n:0 rd:0 us:0 dev:[dev 00:00] disk 7, s:0, o:0, n:0 rd:0 us:0 dev:[dev 00:00] disk 8, s:0, o:0, n:0 rd:0 us:0 dev:[dev 00:00] disk 9, s:0, o:0, n:0 rd:0 us:0 dev:[dev 00:00] disk 10, s:0, o:0, n:0 rd:0 us:0 dev:[dev 00:00] disk 11, s:0, o:0, n:0 rd:0 us:0 dev:[dev 00:00] RAID5 conf printout: --- rd:3 wd:3 fd:0 disk 0, s:0, o:1, n:0 rd:0 us:1 dev:hdg3 disk 1, s:0, o:1, n:1 rd:1 us:1 dev:hde3 disk 2, s:0, o:1, n:2 rd:2 us:1 dev:hda3 disk 3, s:0, o:0, n:0 rd:0 us:0 dev:[dev 00:00] disk 4, s:0, o:0, n:0 rd:0 us:0 dev:[dev 00:00] disk 5, s:0, o:0, n:0 rd:0 us:0 dev:[dev 00:00] disk 6, s:0, o:0, n:0 rd:0 us:0 dev:[dev 00:00] disk 7, s:0, o:0, n:0 rd:0 us:0 dev:[dev 00:00] disk 8, s:0, o:0, n:0 rd:0 us:0 dev:[dev 00:00] disk 9, s:0, o:0, n:0 rd:0 us:0 dev:[dev 00:00] disk 10, s:0, o:0, n:0 rd:0 us:0 dev:[dev 00:00] disk 11, s:0, o:0, n:0 rd:0 us:0 dev:[dev 00:00] md: updating md1 RAID superblock on device hdg3 [events: 000001cc](write) hdg3's sb offset: 1048704 hde3 [events: 000001cc](write) hde3's sb offset: 1048704 hda3 [events: 000001cc](write) hda3's sb offset: 1048704 . considering hdg1 ... adding hdg1 ... adding hde1 ... adding hda1 ... created md0 bind bind bind running: now! hdg1's event counter: 00000039 hde1's event counter: 00000039 hda1's event counter: 00000039 md0: max total readahead window set to 128k md0: 1 data-disks, max readahead per data-disk: 128k raid1: device hdg1 operational as mirror 0 raid1: device hde1 operational as mirror 1 raid1: device hda1 operational as mirror 2 (checking disk 0) (really checking disk 0) usb.c: kmalloc IF cfcb1de0, numif 1 usb.c: skipped 1 class/vendor specific interface descriptors usb.c: USB device number 2 default language ID 0x409 (checking disk 1) (really checking disk 1) Manufacturer: Logitech Product: USB-PS/2 Mouse M-BA47 (checking disk 2) (really checking disk 2) SerialNumber: ? (checking disk 3) (checking disk 4) (checking disk 5) (checking disk 6) (checking disk 7) (checking disk 8) (checking disk 9) (checking disk 10) (checking disk 11) mousedev.c: Adding mouse: input0 input0: USB HID v1.0 Mouse usb.c: hid driver claimed interface cfcb1de0 Length = 18 DescriptorType = 01 USB version = 1.00 Vendor:Product = 046d:c002 MaxPacketSize0 = 8 NumConfigurations = 1 Device version = 1.10 Device Class:SubClass:Protocol = 00:00:00 Per-interface classes Configuration: bLength = 9 bDescriptorType = 02 wTotalLength = 0022 bNumInterfaces = 01 bConfigurationValue = 01 iConfiguration = 00 bmAttributes = a0 MaxPower = 50mA Interface: 0 Alternate Setting: 0 bLength = 9 bDescriptorType = 04 bInterfaceNumber = 00 bAlternateSetting = 00 bNumEndpoints = 01 bInterface Class:SubClass:Protocol = 03:01:02 iInterface = 00 Endpoint: bLength = 7 bDescriptorType = 05 bEndpointAddress = 81 (in) bmAttributes = 03 (Interrupt) wMaxPacketSize = 0008 bInterval = 0a raid1: raid set md0 active with 3 out of 3 mirrors md: updating md0 RAID superblock on device hdg1 [events: 0000003a](write) hdg1's sb offset: 204992 hde1 [events: 0000003a](write) hde1's sb offset: 204992 hda1 [events: 0000003a](write) hda1's sb offset: 204992 . ... autorun DONE. VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 72k freed Adding Swap: 102808k swap-space (priority 0) Adding Swap: 102812k swap-space (priority 0) Adding Swap: 102812k swap-space (priority 0) es1370: version v0.31 time 20:46:12 Mar 25 2000 es1370: found adapter at io 0xd800 irq 10 es1370: features: joystick on, line in, mic impedance 0 tulip.c:v0.91g-ppc 7/16/99 becker@cesdis.gsfc.nasa.gov eth0: Digital DS21140 Tulip rev 32 at 0xd400, 00:00:F8:02:5E:C3, IRQ 12. eth0: EEPROM default media type Autosense. eth0: Index #0 - Media MII (#11) described by a 21140 MII PHY (1) block. eth0: MII transceiver #5 config 3100 status 782f advertising 01e1. eth0: Setting full-duplex based on MII#5 link partner capability of 01e1. nfsd_fh_init : initialized fhcache, entries=1024 /dev/vmmon: Module vmmon: registered with major=10 minor=165 tag=$Name: build-476 $ /dev/vmmon: Module vmmon: initialized parport0: PC-style at 0x378 (0x778) [SPP,ECP,ECPEPP,ECPPS2] parport0: detected irq 7; use procfs to enable interrupt-driven operation. ppuser: User-space parallel port driver /dev/vmnet: open called by PID 819 (vmnet-bridge) /dev/vmnet: hub 0 does not exist, allocating memory. /dev/vmnet: port on hub 0 successfully opened bridge-eth0: up bridge-eth0: attached matroxfb: cannot set xres to 1056, rounded up to 1088 matroxfb: cannot set xres to 1056, rounded up to 1088