Hi.
Probing multiple LUNs causes problems on my system with ide-scsi
and aha152x driver.
My system is set up with scsi0 as an ide-scsi device running my
CD-RW and DVD drives. scsi1 is an aha152x that drives a SCSI CD jukebox. I
have the SCSI drivers compiled as modules, and in order to get the jukebox
to work properly, I have multiple LUNs enabled. Whenever I boot up wuth
2.2.15, it finds 16 copies of each of my ide-scsi CD-ROMs. See output from
/var/log/messages at the end of this message. The effect of this is that
/dev/sr* all point to my CD-RW drive, and my DVD drivce is
inaccessible. Everything works fine in 2.2.14 and 2.3.99-pre6.
From ver_linux:
Kernel modules 2.3.10-pre1
Gnu C egcs-2.91.66
Binutils 2.9.5.0.22
Linux C Library 2.1.3
Dynamic linker ldd (GNU libc) 2.1.3
Linux C++ Library 2.7.2
Linux C++ Library 2.7.2
Procps 2.0.6
Mount 2.10f
Net-tools 1.54
Console-tools 0.3.3
Sh-utils 2.0
Modules Loaded sr_mod cdrom aha152x appletalk 3c59x nls_iso8859-1
isofs nls_cp437 msdos fat loop ip_masq_user ip_masq_quake ip_masq_raudio
ip_masq_irc ip_masq_ftp i2c-proc gl518sm sensors smbus i2c-via algo-bit
i2c-isa i2c-core ide-scsi scsi_mod es1371 soundcore
from /proc/scsi (under kernel 2.2.14, this is how things *should* look
under 2.2.15):
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: HP Model: CD-Writer+ 8200 Rev: 1.0f
Type: CD-ROM ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 01 Lun: 00
Vendor: COMPAQ Model: DVD-ROM GD-2000 Rev: 0056
Type: CD-ROM ANSI SCSI revision: 02
Host: scsi1 Channel: 00 Id: 01 Lun: 00
Vendor: PIONEER Model: CD-ROM DRM-600 Rev: 2404
Type: CD-ROM ANSI SCSI revision: 01 CCS
Host: scsi1 Channel: 00 Id: 01 Lun: 01
Vendor: PIONEER Model: CD-ROM DRM-600 Rev: 2404
Type: CD-ROM ANSI SCSI revision: 01 CCS
Host: scsi1 Channel: 00 Id: 01 Lun: 02
Vendor: PIONEER Model: CD-ROM DRM-600 Rev: 2404
Type: CD-ROM ANSI SCSI revision: 01 CCS
Host: scsi1 Channel: 00 Id: 01 Lun: 03
Vendor: PIONEER Model: CD-ROM DRM-600 Rev: 2404
Type: CD-ROM ANSI SCSI revision: 01 CCS
Host: scsi1 Channel: 00 Id: 01 Lun: 04
Vendor: PIONEER Model: CD-ROM DRM-600 Rev: 2404
Type: CD-ROM ANSI SCSI revision: 01 CCS
Host: scsi1 Channel: 00 Id: 01 Lun: 05
Vendor: PIONEER Model: CD-ROM DRM-600 Rev: 2404
Type: CD-ROM
from /var/log/messages (booting kernel 2.2.15):
May 5 17:46:30 graymalkin kernel: scsi0 : SCSI host adapter emulation for
IDE ATAPI devices
May 5 17:46:30 graymalkin kernel: scsi : 1 host.
May 5 17:46:30 graymalkin kernel: Vendor: HP Model: CD-Writer+
8200 Rev: 1.0f
May 5 17:46:30 graymalkin kernel: Type: CD-ROM
ANSI SCSI revision: 02
May 5 17:46:30 graymalkin kernel: Vendor: HP Model: CD-Writer+
8200 Rev: 1.0f
May 5 17:46:30 graymalkin kernel: Type: CD-ROM
ANSI SCSI revision: 02
May 5 17:46:30 graymalkin kernel: Vendor: HP Model: CD-Writer+
8200 Rev: 1.0f
May 5 17:46:30 graymalkin kernel: Type: CD-ROM
ANSI SCSI revision: 02
May 5 17:46:30 graymalkin kernel: Vendor: HP Model: CD-Writer+
8200 Rev: 1.0f
May 5 17:46:30 graymalkin kernel: Type: CD-ROM
ANSI SCSI revision: 02
May 5 17:46:30 graymalkin kernel: Vendor: HP Model: CD-Writer+
8200 Rev: 1.0f
May 5 17:46:30 graymalkin kernel: Type: CD-ROM
ANSI SCSI revision: 02
May 5 17:46:30 graymalkin kernel: Vendor: HP Model: CD-Writer+
8200 Rev: 1.0f
May 5 17:46:30 graymalkin kernel: Type: CD-ROM
ANSI SCSI revision: 02
May 5 17:46:30 graymalkin kernel: Vendor: HP Model: CD-Writer+
8200 Rev: 1.0f
May 5 17:46:30 graymalkin kernel: Type: CD-ROM
ANSI SCSI revision: 02
May 5 17:46:30 graymalkin kernel: Vendor: HP Model: CD-Writer+
8200 Rev: 1.0f
May 5 17:46:30 graymalkin kernel: Type: CD-ROM
ANSI SCSI revision: 02
May 5 17:46:30 graymalkin kernel: Vendor: COMPAQ Model: DVD-ROM
GD-2000 Rev: 0056
May 5 17:46:30 graymalkin kernel: Type: CD-ROM
ANSI SCSI revision: 02
May 5 17:46:30 graymalkin kernel: Vendor: COMPAQ Model: DVD-ROM
GD-2000 Rev: 0056
May 5 17:46:30 graymalkin kernel: Type: CD-ROM
ANSI SCSI revision: 02
May 5 17:46:30 graymalkin kernel: Vendor: COMPAQ Model: DVD-ROM
GD-2000 Rev: 0056
May 5 17:46:30 graymalkin kernel: Type: CD-ROM
ANSI SCSI revision: 02
May 5 17:46:30 graymalkin kernel: Vendor: COMPAQ Model: DVD-ROM
GD-2000 Rev: 0056
May 5 17:46:30 graymalkin kernel: Type: CD-ROM
ANSI SCSI revision: 02
May 5 17:46:30 graymalkin kernel: Vendor: COMPAQ Model: DVD-ROM
GD-2000 Rev: 0056
May 5 17:46:30 graymalkin kernel: Type: CD-ROM
ANSI SCSI revision: 02
May 5 17:46:30 graymalkin kernel: Vendor: COMPAQ Model: DVD-ROM
GD-2000 Rev: 0056
May 5 17:46:30 graymalkin kernel: Type: CD-ROM
ANSI SCSI revision: 02
May 5 17:46:30 graymalkin kernel: Vendor: COMPAQ Model: DVD-ROM
GD-2000 Rev: 0056
May 5 17:46:30 graymalkin kernel: Type: CD-ROM
ANSI SCSI revision: 02
May 5 17:46:30 graymalkin kernel: Vendor: COMPAQ Model: DVD-ROM
GD-2000 Rev: 0056
May 5 17:46:30 graymalkin kernel: Type: CD-ROM
ANSI SCSI revision: 02
May 5 17:46:30 graymalkin kernel: aha152x: BIOS test: passed, auto
configuration: ok, detected 1 controller(s)
May 5 17:46:30 graymalkin kernel: aha152x0: vital data: PORTBASE=0x140,
IRQ=11, SCSI ID=7, reconnect=enabled, parity=enabled,
synchronous=disabled, delay=100, extended translation=disabled
May 5 17:46:30 graymalkin kernel: aha152x: trying software interrupt, ok.
May 5 17:46:30 graymalkin kernel: scsi1 : Adaptec 152x SCSI
driver; $Revision: 1.7 $
May 5 17:46:30 graymalkin kernel: scsi : 2 hosts.
May 5 17:46:30 graymalkin kernel: Vendor: UMAX Model: UC630
Rev: V2.8
May 5 17:46:30 graymalkin kernel: Type: Scanner
ANSI SCSI revision: 02
May 5 17:46:30 graymalkin kernel: scsi1 : channel 0 target 0 lun 1
request sense failed, performing reset.
May 5 17:46:30 graymalkin kernel: SCSI bus is being reset for host 1
channel 0.
May 5 17:46:30 graymalkin kernel: scsi : aborting command due to timeout
: pid 34, scsi1, channel 0, id 0, lun 1 0x00 20 00 00 00 00
May 5 17:46:30 graymalkin kernel: aha152x: abort(), SCpnt=0xc009ee00,
QUEUE STATUS:
May 5 17:46:30 graymalkin kernel: issue_SC:
May 5 17:46:30 graymalkin kernel: 0xc009ee00: target=0; lun=1; cmnd=(0x00
20 00 00 00 00
May 5 17:46:30 graymalkin kernel: ); residual=256; buffers=0; phase |not
issued|; next=0x00000000
May 5 17:46:30 graymalkin kernel: current_SC:
May 5 17:46:30 graymalkin kernel: none
May 5 17:46:30 graymalkin kernel: disconnected_SC:
May 5 17:46:30 graymalkin kernel:
May 5 17:46:30 graymalkin kernel: waiting: SCSISEQ (); SCSISIG (DATA
OUT); INTSTAT (hi); SSTAT (BUSFREE ); SSTAT (BUSFREE ); SXFRCTL0 (CH1
); SIGNAL (); SELID (00), SSTAT2 (SEMPTY ); SFCNT (0); SCSICNT (0),
OFFCNT(0), SSTAT4 (); DMACNTRL0 (16BIT PIO READ ); DMASTAT (DFIFOEMP )
May 5 17:46:30 graymalkin kernel: enabled interrupts (ENBUSFREE )
May 5 17:46:30 graymalkin kernel: scsi : aborting command due to timeout
: pid 34, scsi1, channel 0, id 0, lun 1 0x00 20 00 00 00 00
May 5 17:46:30 graymalkin kernel: aha152x: abort(), SCpnt=0xc009ee00,
QUEUE STATUS:
May 5 17:46:30 graymalkin kernel: issue_SC:
May 5 17:46:30 graymalkin kernel: 0xc009ee00: target=0; lun=1; cmnd=(0x00
20 00 00 00 00
May 5 17:46:30 graymalkin kernel: ); residual=256; buffers=0; phase |not
issued|; next=0x00000000
May 5 17:46:30 graymalkin kernel: current_SC:
May 5 17:46:30 graymalkin kernel: none
May 5 17:46:30 graymalkin kernel: disconnected_SC:
May 5 17:46:30 graymalkin kernel:
May 5 17:46:30 graymalkin kernel: waiting: SCSISEQ (); SCSISIG (DATA
OUT); INTSTAT (hi); SSTAT (BUSFREE ); SSTAT (BUSFREE ); SXFRCTL0 (CH1
); SIGNAL (); SELID (00), SSTAT2 (SEMPTY ); SFCNT (0); SCSICNT (0),
OFFCNT(0), SSTAT4 (); DMACNTRL0 (16BIT PIO READ ); DMASTAT (DFIFOEMP )
May 5 17:46:30 graymalkin kernel: enabled interrupts (ENBUSFREE )
May 5 17:46:30 graymalkin kernel: scsi : aborting command due to timeout
: pid 35, scsi1, channel 0, id 1, lun 0 0x00 00 00 00 00 00
May 5 17:46:30 graymalkin kernel: aha152x: abort(), SCpnt=0xc009ee00,
QUEUE STATUS:
May 5 17:46:30 graymalkin kernel: issue_SC:
May 5 17:46:30 graymalkin kernel: 0xc009ee00: target=1; lun=0; cmnd=(0x00
00 00 00 00 00
May 5 17:46:30 graymalkin kernel: ); residual=256; buffers=0; phase |not
issued|; next=0x00000000
May 5 17:46:30 graymalkin kernel: current_SC:
May 5 17:46:30 graymalkin kernel: none
May 5 17:46:30 graymalkin kernel: disconnected_SC:
May 5 17:46:30 graymalkin kernel:
May 5 17:46:30 graymalkin kernel: waiting: SCSISEQ (); SCSISIG (DATA
OUT); INTSTAT (hi); SSTAT (BUSFREE ); SSTAT (BUSFREE ); SXFRCTL0 (CH1
); SIGNAL (); SELID (00), SSTAT2 (SEMPTY ); SFCNT (0); SCSICNT (0),
OFFCNT(0), SSTAT4 (); DMACNTRL0 (16BIT PIO READ ); DMASTAT (DFIFOEMP )
May 5 17:46:30 graymalkin kernel: enabled interrupts (ENBUSFREE )
May 5 17:46:30 graymalkin kernel: scsi : aborting command due to timeout
: pid 35, scsi1, channel 0, id 1, lun 0 0x00 00 00 00 00 00
May 5 17:46:30 graymalkin kernel: aha152x: abort(), SCpnt=0xc009ee00,
QUEUE STATUS:
May 5 17:46:30 graymalkin kernel: issue_SC:
May 5 17:46:30 graymalkin kernel: 0xc009ee00: target=1; lun=0; cmnd=(0x00
00 00 00 00 00
May 5 17:46:30 graymalkin kernel: ); residual=256; buffers=0; phase |not
issued|; next=0x00000000
May 5 17:46:30 graymalkin kernel: current_SC:
May 5 17:46:30 graymalkin kernel: none
May 5 17:46:30 graymalkin kernel: disconnected_SC:
May 5 17:46:30 graymalkin kernel:
May 5 17:46:30 graymalkin kernel: waiting: SCSISEQ (); SCSISIG (DATA
OUT); INTSTAT (hi); SSTAT (BUSFREE ); SSTAT (BUSFREE ); SXFRCTL0 (CH1
); SIGNAL (); SELID (00), SSTAT2 (SEMPTY ); SFCNT (0); SCSICNT (0),
OFFCNT(0), SSTAT4 (); DMACNTRL0 (16BIT PIO READ ); DMASTAT (DFIFOEMP )
May 5 17:46:30 graymalkin kernel: enabled interrupts (ENBUSFREE )
May 5 17:46:30 graymalkin kernel: scsi : aborting command due to timeout
: pid 36, scsi1, channel 0, id 2, lun 0 0x00 00 00 00 00 00
May 5 17:46:30 graymalkin kernel: aha152x: abort(), SCpnt=0xc009ee00,
QUEUE STATUS:
May 5 17:46:30 graymalkin kernel: issue_SC:
May 5 17:46:30 graymalkin kernel: 0xc009ee00: target=2; lun=0; cmnd=(0x00
00 00 00 00 00
May 5 17:46:30 graymalkin kernel: ); residual=256; buffers=0; phase |not
issued|; next=0x00000000
May 5 17:46:30 graymalkin kernel: current_SC:
May 5 17:46:30 graymalkin kernel: none
May 5 17:46:30 graymalkin kernel: disconnected_SC:
May 5 17:46:30 graymalkin kernel:
May 5 17:46:30 graymalkin kernel: waiting: SCSISEQ (); SCSISIG (DATA
OUT); INTSTAT (hi); SSTAT (BUSFREE ); SSTAT (BUSFREE ); SXFRCTL0 (CH1
); SIGNAL (); SELID (00), SSTAT2 (SEMPTY ); SFCNT (0); SCSICNT (0),
OFFCNT(0), SSTAT4 (); DMACNTRL0 (16BIT PIO READ ); DMASTAT (DFIFOEMP )
May 5 17:46:30 graymalkin kernel: enabled interrupts (ENBUSFREE )
May 5 17:46:30 graymalkin kernel: scsi : aborting command due to timeout
: pid 36, scsi1, channel 0, id 2, lun 0 0x00 00 00 00 00 00
May 5 17:46:30 graymalkin kernel: aha152x: abort(), SCpnt=0xc009ee00,
QUEUE STATUS:
May 5 17:46:30 graymalkin kernel: issue_SC:
May 5 17:46:30 graymalkin kernel: 0xc009ee00: target=2; lun=0; cmnd=(0x00
00 00 00 00 00
May 5 17:46:30 graymalkin kernel: ); residual=256; buffers=0; phase |not
issued|; next=0x00000000
May 5 17:46:30 graymalkin kernel: current_SC:
May 5 17:46:30 graymalkin kernel: none
May 5 17:46:30 graymalkin kernel: disconnected_SC:
May 5 17:46:30 graymalkin kernel:
May 5 17:46:30 graymalkin kernel: waiting: SCSISEQ (); SCSISIG (DATA
OUT); INTSTAT (hi); SSTAT (BUSFREE ); SSTAT (BUSFREE ); SXFRCTL0 (CH1
); SIGNAL (); SELID (00), SSTAT2 (SEMPTY ); SFCNT (0); SCSICNT (0),
OFFCNT(0), SSTAT4 (); DMACNTRL0 (16BIT PIO READ ); DMASTAT (DFIFOEMP )
May 5 17:46:30 graymalkin kernel: enabled interrupts (ENBUSFREE )
May 5 17:46:30 graymalkin kernel: scsi : aborting command due to timeout
: pid 37, scsi1, channel 0, id 3, lun 0 0x00 00 00 00 00 00
May 5 17:46:30 graymalkin kernel: aha152x: abort(), SCpnt=0xc009ee00,
QUEUE STATUS:
May 5 17:46:30 graymalkin kernel: issue_SC:
May 5 17:46:30 graymalkin kernel: 0xc009ee00: target=3; lun=0; cmnd=(0x00
00 00 00 00 00
May 5 17:46:30 graymalkin kernel: ); residual=256; buffers=0; phase |not
issued|; next=0x00000000
May 5 17:46:30 graymalkin kernel: current_SC:
May 5 17:46:30 graymalkin kernel: none
May 5 17:46:30 graymalkin kernel: disconnected_SC:
May 5 17:46:30 graymalkin kernel:
May 5 17:46:30 graymalkin kernel: waiting: SCSISEQ (); SCSISIG (DATA
OUT); INTSTAT (hi); SSTAT (BUSFREE ); SSTAT (BUSFREE ); SXFRCTL0 (CH1
); SIGNAL (); SELID (00), SSTAT2 (SEMPTY ); SFCNT (0); SCSICNT (0),
OFFCNT(0), SSTAT4 (); DMACNTRL0 (16BIT PIO READ ); DMASTAT (DFIFOEMP )
May 5 17:46:30 graymalkin kernel: enabled interrupts (ENBUSFREE )
May 5 17:46:30 graymalkin kernel: scsi : aborting command due to timeout
: pid 37, scsi1, channel 0, id 3, lun 0 0x00 00 00 00 00 00
May 5 17:46:30 graymalkin kernel: aha152x: abort(), SCpnt=0xc009ee00,
QUEUE STATUS:
May 5 17:46:30 graymalkin kernel: issue_SC:
May 5 17:46:30 graymalkin kernel: 0xc009ee00: target=3; lun=0; cmnd=(0x00
00 00 00 00 00
May 5 17:46:30 graymalkin kernel: ); residual=256; buffers=0; phase |not
issued|; next=0x00000000
May 5 17:46:30 graymalkin kernel: current_SC:
May 5 17:46:30 graymalkin kernel: none
May 5 17:46:30 graymalkin kernel: disconnected_SC:
May 5 17:46:30 graymalkin kernel:
May 5 17:46:30 graymalkin kernel: waiting: SCSISEQ (); SCSISIG (DATA
OUT); INTSTAT (hi); SSTAT (BUSFREE ); SSTAT (BUSFREE ); SXFRCTL0 (CH1
); SIGNAL (); SELID (00), SSTAT2 (SEMPTY ); SFCNT (0); SCSICNT (0),
OFFCNT(0), SSTAT4 (); DMACNTRL0 (16BIT PIO READ ); DMASTAT (DFIFOEMP )
May 5 17:46:30 graymalkin kernel: enabled interrupts (ENBUSFREE )
May 5 17:46:30 graymalkin kernel: scsi : aborting command due to timeout
: pid 38, scsi1, channel 0, id 4, lun 0 0x00 00 00 00 00 00
May 5 17:46:30 graymalkin kernel: aha152x: abort(), SCpnt=0xc009ee00,
QUEUE STATUS:
May 5 17:46:30 graymalkin kernel: issue_SC:
May 5 17:46:30 graymalkin kernel: 0xc009ee00: target=4; lun=0; cmnd=(0x00
00 00 00 00 00
May 5 17:46:30 graymalkin kernel: ); residual=256; buffers=0; phase |not
issued|; next=0x00000000
May 5 17:46:30 graymalkin kernel: current_SC:
May 5 17:46:30 graymalkin kernel: none
May 5 17:46:30 graymalkin kernel: disconnected_SC:
May 5 17:46:30 graymalkin kernel:
May 5 17:46:30 graymalkin kernel: waiting: SCSISEQ (); SCSISIG (DATA
OUT); INTSTAT (hi); SSTAT (BUSFREE ); SSTAT (BUSFREE ); SXFRCTL0 (CH1
); SIGNAL (); SELID (00), SSTAT2 (SEMPTY ); SFCNT (0); SCSICNT (0),
OFFCNT(0), SSTAT4 (); DMACNTRL0 (16BIT PIO READ ); DMASTAT (DFIFOEMP )
May 5 17:46:30 graymalkin kernel: enabled interrupts (ENBUSFREE )
May 5 17:46:30 graymalkin kernel: scsi : aborting command due to timeout
: pid 38, scsi1, channel 0, id 4, lun 0 0x00 00 00 00 00 00
May 5 17:46:30 graymalkin kernel: aha152x: abort(), SCpnt=0xc009ee00,
QUEUE STATUS:
May 5 17:46:30 graymalkin kernel: issue_SC:
May 5 17:46:30 graymalkin kernel: 0xc009ee00: target=4; lun=0; cmnd=(0x00
00 00 00 00 00
May 5 17:46:30 graymalkin kernel: ); residual=256; buffers=0; phase |not
issued|; next=0x00000000
May 5 17:46:30 graymalkin kernel: current_SC:
May 5 17:46:30 graymalkin kernel: none
May 5 17:46:30 graymalkin kernel: disconnected_SC:
May 5 17:46:30 graymalkin kernel:
May 5 17:46:30 graymalkin kernel: waiting: SCSISEQ (); SCSISIG (DATA
OUT); INTSTAT (hi); SSTAT (BUSFREE ); SSTAT (BUSFREE ); SXFRCTL0 (CH1
); SIGNAL (); SELID (00), SSTAT2 (SEMPTY ); SFCNT (0); SCSICNT (0),
OFFCNT(0), SSTAT4 (); DMACNTRL0 (16BIT PIO READ ); DMASTAT (DFIFOEMP )
May 5 17:46:30 graymalkin kernel: enabled interrupts (ENBUSFREE )
May 5 17:46:30 graymalkin kernel: scsi : aborting command due to timeout
: pid 39, scsi1, channel 0, id 5, lun 0 0x00 00 00 00 00 00
May 5 17:46:30 graymalkin kernel: aha152x: abort(), SCpnt=0xc009ee00,
QUEUE STATUS:
May 5 17:46:30 graymalkin kernel: issue_SC:
May 5 17:46:30 graymalkin kernel: 0xc009ee00: target=5; lun=0; cmnd=(0x00
00 00 00 00 00
May 5 17:46:30 graymalkin kernel: ); residual=256; buffers=0; phase |not
issued|; next=0x00000000
May 5 17:46:30 graymalkin kernel: current_SC:
May 5 17:46:30 graymalkin kernel: none
May 5 17:46:30 graymalkin kernel: disconnected_SC:
May 5 17:46:30 graymalkin kernel:
May 5 17:46:30 graymalkin kernel: waiting: SCSISEQ (); SCSISIG (DATA
OUT); INTSTAT (hi); SSTAT (BUSFREE ); SSTAT (BUSFREE ); SXFRCTL0 (CH1
); SIGNAL (); SELID (00), SSTAT2 (SEMPTY ); SFCNT (0); SCSICNT (0),
OFFCNT(0), SSTAT4 (); DMACNTRL0 (16BIT PIO READ ); DMASTAT (DFIFOEMP )
May 5 17:46:30 graymalkin kernel: enabled interrupts (ENBUSFREE )
May 5 17:46:30 graymalkin kernel: scsi : aborting command due to timeout
: pid 39, scsi1, channel 0, id 5, lun 0 0x00 00 00 00 00 00
May 5 17:46:30 graymalkin kernel: aha152x: abort(), SCpnt=0xc009ee00,
QUEUE STATUS:
May 5 17:46:30 graymalkin kernel: issue_SC:
May 5 17:46:30 graymalkin kernel: 0xc009ee00: target=5; lun=0; cmnd=(0x00
00 00 00 00 00
May 5 17:46:30 graymalkin kernel: ); residual=256; buffers=0; phase |not
issued|; next=0x00000000
May 5 17:46:30 graymalkin kernel: current_SC:
May 5 17:46:30 graymalkin kernel: none
May 5 17:46:30 graymalkin kernel: disconnected_SC:
May 5 17:46:30 graymalkin kernel:
May 5 17:46:30 graymalkin kernel: waiting: SCSISEQ (); SCSISIG (DATA
OUT); INTSTAT (hi); SSTAT (BUSFREE ); SSTAT (BUSFREE ); SXFRCTL0 (CH1
); SIGNAL (); SELID (00), SSTAT2 (SEMPTY ); SFCNT (0); SCSICNT (0),
OFFCNT(0), SSTAT4 (); DMACNTRL0 (16BIT PIO READ ); DMASTAT (DFIFOEMP )
May 5 17:46:30 graymalkin kernel: enabled interrupts (ENBUSFREE )
May 5 17:46:30 graymalkin kernel: scsi : aborting command due to timeout
: pid 40, scsi1, channel 0, id 6, lun 0 0x00 00 00 00 00 00
May 5 17:46:30 graymalkin kernel: aha152x: abort(), SCpnt=0xc009ee00,
QUEUE STATUS:
May 5 17:46:30 graymalkin kernel: issue_SC:
May 5 17:46:30 graymalkin kernel: 0xc009ee00: target=6; lun=0; cmnd=(0x00
00 00 00 00 00
May 5 17:46:30 graymalkin kernel: ); residual=256; buffers=0; phase |not
issued|; next=0x00000000
May 5 17:46:30 graymalkin kernel: current_SC:
May 5 17:46:30 graymalkin kernel: none
May 5 17:46:30 graymalkin kernel: disconnected_SC:
May 5 17:46:30 graymalkin kernel:
May 5 17:46:30 graymalkin kernel: waiting: SCSISEQ (); SCSISIG (DATA
OUT); INTSTAT (hi); SSTAT (BUSFREE ); SSTAT (BUSFREE ); SXFRCTL0 (CH1
); SIGNAL (); SELID (00), SSTAT2 (SEMPTY ); SFCNT (0); SCSICNT (0),
OFFCNT(0), SSTAT4 (); DMACNTRL0 (16BIT PIO READ ); DMASTAT (DFIFOEMP )
May 5 17:46:30 graymalkin kernel: enabled interrupts (ENBUSFREE )
May 5 17:46:30 graymalkin kernel: scsi : aborting command due to timeout
: pid 40, scsi1, channel 0, id 6, lun 0 0x00 00 00 00 00 00
May 5 17:46:30 graymalkin kernel: aha152x: abort(), SCpnt=0xc009ee00,
QUEUE STATUS:
May 5 17:46:30 graymalkin kernel: issue_SC:
May 5 17:46:30 graymalkin kernel: 0xc009ee00: target=6; lun=0; cmnd=(0x00
00 00 00 00 00
May 5 17:46:30 graymalkin kernel: ); residual=256; buffers=0; phase |not
issued|; next=0x00000000
May 5 17:46:30 graymalkin kernel: current_SC:
May 5 17:46:30 graymalkin kernel: none
May 5 17:46:30 graymalkin kernel: disconnected_SC:
May 5 17:46:30 graymalkin kernel:
May 5 17:46:30 graymalkin kernel: waiting: SCSISEQ (); SCSISIG (DATA
OUT); INTSTAT (hi); SSTAT (BUSFREE ); SSTAT (BUSFREE ); SXFRCTL0 (CH1
); SIGNAL (); SELID (00), SSTAT2 (SEMPTY ); SFCNT (0); SCSICNT (0),
OFFCNT(0), SSTAT4 (); DMACNTRL0 (16BIT PIO READ ); DMASTAT (DFIFOEMP )
May 5 17:46:30 graymalkin kernel: enabled interrupts (ENBUSFREE )
nate@wpi.edu | Nate Godin, President, WPI Linux Association
Graymalkin: http://graymalkin.res.wpi.net | SMB: //graymalkin/public
Jon's World Organisation | http://www.jwo.dhs.org/ | ftp://ftp.jwo.dhs.org
RedHat 6.2 and updates, Linux kernel sources and patches, GNOME, LDP
Finger nate@graymalkin.res.wpi.net for my PGP/GPG Public Keys
Never let your sense of morals prevent you from doing what is right.
- Salvor Hardin, "Foundation"
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Sat May 06 2000 - 14:48:23 EDT