I noticed this upon booting. It does it every time at boot without fail.
Other than that, the network seems to work fine !
System is a Dual PII-400 on a Gigabyte GA6-BXD motherboard with 128Megs ram.
3c59x.c:v0.99L+LK1.1.2+AKPM 24 Apr 2000 Donald Becker and others
http://cesdis.gsfc.nasa.gov/linux/drivers/vortex.html
eth0: 3Com PCI 3c905 Boomerang 100baseTx at 0xe400, 00:60:08:57:74:26, IRQ
16
8K word-wide RAM 3:5 Rx:Tx split, autoselect/MII interface.
MII transceiver found at address 24, status 786f.
Enabling bus-master transmits and whole-frame receives.
eth0: first avaialble mdeia type: MII
NETDEV WATCHDOG: eth0: transmit timed out
eth0: transmit timed out, tx_status 00 status e000.
Flags; bus-master 1, full 1; dirty 0 current 16.
Transmit list 076c6200 vs. c76c6200.
0: @c76c6200 length 8000002a status 0000002a
1: @c76c6210 length 8000002a status 0000002a
2: @c76c6220 length 8000002a status 0000002a
3: @c76c6230 length 8000002a status 0000002a
4: @c76c6240 length 8000002a status 0000002a
5: @c76c6250 length 8000002a status 0000002a
6: @c76c6260 length 8000002a status 0000002a
7: @c76c6270 length 8000002a status 0000002a
8: @c76c6280 length 8000002a status 0000002a
9: @c76c6290 length 8000002a status 0000002a
10: @c76c62a0 length 8000002a status 0000002a
11: @c76c62b0 length 8000002a status 0000002a
12: @c76c62c0 length 8000002a status 0000002a
13: @c76c62d0 length 8000002a status 0000002a
14: @c76c62e0 length 8000002a status 8000002a
15: @c76c62f0 length 8000002a status 8000002a
eth0: Resetting the Tx ring pointer.
kmem_create: Forcing size word alignment - nfs_fh
Lee Mitchell
www.spamtastic.demon.co.uk
lee@spamtastic.demon.co.uk
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Wed May 10 2000 - 16:54:33 EDT