Hey All-
I've had a problem with my notebook in that the floppy driver will not
work. Attached is the dmesg after a successful boot and an attempt to
mount the floppy. The drive does work in 2.2.15 and MS Win98 (sorry,
gotta play DVDs somehow). Also attached are /proc/interrupts and
/proc/ioports. I was getting errors before that 0x3f0 was in use -
/proc/ioports says that 0x3f6 is in use by ide0. I'm not sure if this
is a floppy bug or a PIIX bug, or if it's just me. If it helps, it a
Trogon Q.23 notebook (aka MaxTech Green759).
Please note, I'm not on the list, so please CC any replies to me.
Thanks for the help!
-Carl
---8<---8<---8<---]dmesg[---8<---8<---8<---
mapped APIC to ffffe000 (01121000)
Initializing CPU#0
Detected 400916663 Hz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 799.54 BogoMIPS
Memory: 61420k/65472k available (1859k kernel code, 3664k reserved, 114k
data, 196k init, 0k highmem)
VFS: DCACHE hash table configured to 8192 entries
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 16384 (order: 4, 65536 bytes)
VFS: INODE hash table configured to 4096 entries
CPU: L1 I Cache: 32K L1 D Cache: 32K
Enabling new style K6 write allocation for 63 Mb
CPU: AMD AMD-K6(tm) 3D processor stepping 0c
Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.36 (20000221) Richard Gooch (rgooch@atnf.csiro.au)
PCI: PCI BIOS revision 2.10 entry at 0xfd993, last bus=0
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Using IRQ router PIIX [8086/122e] at 00:01.0
Limiting direct PCI/PCI transfers.
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
uhci.c: USB UHCI at I/O 0xfce0, IRQ 5
uhci.c: detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
usb.c: USB new device connect, assigned device number 1
hub.c: USB hub found
hub.c: 2 ports detected
Linux NET4.0 for Linux 2.3
Based upon Swansea University Computer Society NET3.039
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 4096 bind 4096)
IPv4 over IPv4 tunneling driver
early initialization of device tunl0 is deferred
IrDA (tm) Protocols for Linux-2.3 (Dag Brattli)
get_random_bytes called before random driver initialization
get_random_bytes called before random driver initialization
get_random_bytes called before random driver initialization
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.13)
Starting kswapd v1.6
0x378: FIFO is 16 bytes
0x378: writeIntrThreshold is 8
0x378: readIntrThreshold is 8
0x378: PWord is 8 bits
0x378: Interrupts are ISA-Pulses
0x378: ECP port cfgA=0x14 cfgB=0x48
0x378: ECP settings irq=7 dma=<none or set by other means>
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,ECP]
parport0: irq 7 detected
parport0: cpp_daisy: aa5500ff(38)
parport0: assign_addrs: aa5500ff(38)
parport0: cpp_daisy: aa5500ff(38)
parport0: assign_addrs: aa5500ff(38)
pty: 256 Unix98 ptys configured
lp0: using parport0 (polling).
js: Joystick driver v1.2.15 (c) 1999 Vojtech Pavlik <vojtech@suse.cz>
loop: registered device at major 7
loop: enabling 8 loop devices
Uniform Multi-Platform E-IDE driver Revision: 6.30
ide: Assuming 33MHz system bus speed for PIO modes; override with
idebus=xx
PIIX4: IDE controller on PCI bus 00 dev 09
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xfcd0-0xfcd7, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xfcd8-0xfcdf, BIOS settings: hdc:pio, hdd:pio
hda: HITACHI_DK227A-50, ATA DISK drive
hdc: UJDA510, ATAPI CDROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: 9809100 sectors (5022 MB) w/512KiB Cache, CHS=648/240/63
hdc: ATAPI 20X DVD-ROM drive, 128kB Cache
Uniform CD-ROM driver Revision: 3.07
Partition check:
/dev/ide/host0/bus0/target0/lun0: [PTBL] [610/255/63] p1 p2 p3
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
Serial driver version 4.93 (2000-03-20) with MANY_PORTS SHARE_IRQ
SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Real Time Clock Driver v1.10b
PPP generic driver version 2.4.1
PPP Deflate Compression module registered
maestro: version 0.14 time 23:18:48 Apr 29 2000
maestro: Configuring ESS Maestro 2 found at IO 0xF800 IRQ 5
maestro: subvendor id: 0x1968125d
maestro: not attempting power management.
maestro: AC97 Codec detected: v: 0x414b4d00 caps: 0x0 pwr: 0xf
maestro: 1 channels configured.
usb.c: registered new driver acm
usb.c: registered new driver hid
mice: PS/2 mouse device common for all mice
usb.c: registered new driver wacom
ip_conntrack (511 buckets, 4088 max)
ip_tables: (c)2000 Netfilter core team
devfs: v0.94 (20000415) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
kmem_create: Forcing size word alignment - nfs_fh
VFS: Mounted root (ext2 filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 196k freed
Adding Swap: 240964k swap-space (priority -1)
Linux PCMCIA Card Services 3.1.11
kernel build: 2.3.99-pre6 #2 Sun Apr 30 12:34:53 CDT 2000
options: [pci] [cardbus] [pm]
Intel PCIC probe:
Intel i82365sl DF ISA-to-PCMCIA at port 0x3e0 ofs 0x00, 2 sockets
host opts [0]: none
host opts [1]: none
ISA irqs (scanned) = 3,4,7,10 polling interval = 1000 ms
cs: IO port probe 0x0100-0x04ff: excluding 0x398-0x39f 0x4d0-0x4d7
cs: memory probe 0x0d0000-0x0dffff: excluding 0xdc000-0xdffff
cs: memory probe 0x0c0000-0x0cffff: excluding 0xc0000-0xcbfff
eth0: NE2000 Compatible: io 0x300, irq 10, hw_addr 00:E0:98:07:C9:F9
ttyS02 at port 0x03e8 (irq = 10) is a 16550A
eth0: found link beat
spurious 8259A interrupt: IRQ7.
VFS: Disk change detected on device fd(2,0)
Trying to lock fdc while usage count=0
warning: usage count=0, CURRENT=c034b560 exiting
sect=0 cmd=0
floppy0: fractionary current count b=0 s=0
addr=0, length=0
st=0 ast=0 mse=18 msi=18
ssize=1 SIZECODE=2
command=e6 SECTOR=1 HEAD=0, TRACK=0
buffer drive=0
buffer track=-1
buffer_min=0
buffer_max=0
end_request: I/O error, dev 02:00 (floppy), sector 0
floppy0: FDC access conflict!
floppy0: Floppy io-port 0x03f0 in use
motor off timer 0 still active
VFS: Disk change detected on device fd(2,0)
Trying to lock fdc while usage count=0
warning: usage count=0, CURRENT=c034b510 exiting
sect=0 cmd=0
floppy0: Floppy io-port 0x03f0 in use
motor off timer 0 still active
floppy driver state
-------------------
now=163603 last interrupt=478 diff=163125 last called handler=c01a4fd0
timeout_message=redo fd request
last output bytes:
0 0 0
0 0 0
0 0 0
8 80 478
8 80 478
8 80 478
8 80 478
e 80 478
13 80 478
0 90 478
1a 90 478
0 90 478
12 80 478
0 90 478
14 80 478
18 80 478
8 80 478
8 80 478
8 80 478
8 80 478
last result at 479
last redo_fd_request at 163303
status=ff
fdc_busy=0
DEVICE_INTR=c01a4fd0
cont=c02de8e8
CURRENT=c034b510
command_status=-1
floppy0: floppy timeout called
end_request: I/O error, dev 02:00 (floppy), sector 0
floppy0: FDC access conflict!
VFS: Disk change detected on device fd(2,0)
floppy0: fractionary current count b=0 s=0
addr=0, length=0
st=0 ast=0 mse=18 msi=18
ssize=1 SIZECODE=2
command=e6 SECTOR=1 HEAD=0, TRACK=0
buffer drive=0
buffer track=-1
buffer_min=0
buffer_max=0
end_request: I/O error, dev 02:00 (floppy), sector 0
VFS: Disk change detected on device fd(2,0)
floppy0: Floppy io-port 0x03f0 in use
motor off timer 0 still active
floppy timer still active:lock fdc
floppy0: fractionary current count b=0 s=0
addr=0, length=0
st=0 ast=0 mse=18 msi=18
ssize=1 SIZECODE=2
command=e6 SECTOR=1 HEAD=0, TRACK=0
buffer drive=0
buffer track=-1
buffer_min=0
buffer_max=0
end_request: I/O error, dev 02:00 (floppy), sector 0
floppy0: fractionary current count b=0 s=0
addr=0, length=0
st=0 ast=0 mse=18 msi=18
ssize=1 SIZECODE=2
command=e6 SECTOR=1 HEAD=0, TRACK=0
buffer drive=0
buffer track=-1
buffer_min=0
buffer_max=0
end_request: I/O error, dev 02:00 (floppy), sector 0
hfs_fs: unable to read block 0x00000000 from dev 02:00
hfs_fs: Unable to read block 0.
---8<---8<---8<---]/proc/interrupts[---8<---8<---8<---
CPU0
0: 216274 XT-PIC timer
1: 4033 XT-PIC keyboard
2: 0 XT-PIC cascade
5: 1003 XT-PIC usb-uhci, ESS Maestro 2
8: 2 XT-PIC rtc
10: 73645 XT-PIC pcnet_cs
12: 8483 XT-PIC PS/2 Mouse
13: 1 XT-PIC fpu
14: 30070 XT-PIC ide0
15: 2 XT-PIC ide1
NMI: 0
ERR: 1
---8<---8<---8<---]/proc/ioports[---8<---8<---8<---
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0070-007f : rtc
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
02f8-02ff : serial(auto)
0300-031f : pcnet_cs
0376-0376 : ide1
0378-037a : parport0
03c0-03df : vga+
03e0-03e1 : i82365
03e8-03ef : serial(set)
03f6-03f6 : ide0
03f8-03ff : serial(auto)
0778-077a : parport0
2180-219f : Intel Corporation 82371AB PIIX4 ACPI
8000-803f : Intel Corporation 82371AB PIIX4 ACPI
f800-f8ff : ESS Technology ES1968 Maestro 2
f800-f8ff : ESS Maestro 2
fc00-fc7f : Acer Laboratories Inc. [ALi] M3309
fcd0-fcdf : Intel Corporation 82371AB PIIX4 IDE
fcd0-fcd7 : ide0
fcd8-fcdf : ide1
fce0-fcff : Intel Corporation 82371AB PIIX4 USB
fce0-fcff : usb-uhci
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Wed May 10 2000 - 22:04:35 EDT