Re: 2.3.99-pre9 and later don't recognize partition table

From: David Ford (david@kalifornia.com)
Date: Sat May 27 2000 - 15:05:45 EDT

Next message: Andreas Dilger: "[PATCH] 2.2.X fix ext2 socket filetype"

Previous message: Dave Cinege: "Re: [PATCH] 5 year old bug in main.c (initrd). Can this please be fixed?"
In reply to: Remi Turk: "2.3.99-pre9 and later don't recognize partition table"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

This also happens when VIA tuning is turned on, it recognizes hda but not hdc or hdd.

Uniform Multi-Platform E-IDE driver Revision: 6.30
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller on PCI bus 00 dev 39
VP_IDE: not 100% native mode: will probe irqs later
VT 82C691 Apollo Pro
Chipset Core ATA-66
Split FIFO Configuration: 8 Primary buffers, threshold = 1/2
                           8 Second. buffers, threshold = 1/2
    ide0: BM-DMA at 0xe000-0xe007, BIOS settings: hda:DMA, hdb:pio
ide0: VIA Bus-Master (U)DMA Timing Config Success
    ide1: BM-DMA at 0xe008-0xe00f, BIOS settings: hdc:DMA, hdd:DMA
ide1: VIA Bus-Master (U)DMA Timing Config Success
hda: IBM-DPTA-372050, ATA DISK drive
hdc: WDC AC31200F, ATA DISK drive
hdd: Maxtor 85120 A8 -, ATA DISK drive

-d

Remi Turk wrote:

> Hi,
> both 2.3.99-pre9 and 2.3.99-pre10-3/2.4.0-test1 don't recognize my partition tables anymore.
> 2.3.99-pre8 with the same .config works correctly.
> Compiler is egcs-2.91.66.
>
> ...
> Uniform Multi-Platform E-IDE driver Revision: 6.30
> ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
> ALI15X3: IDE controller on PCI bus 00 dev 78
> ALI15X3: chipset revision 193
> ALI15X3: not 100% native mode: will probe irqs later
> ide0: BM-DMA at 0xd000-0xd007, BIOS settings: hda:DMA, hdb:pio
> ide1: BM-DMA at 0xd008-0xd00f, BIOS settings: hdc:DMA, hdd:pio
> hda: QUANTUM FIREBALL EL5.1A, ATA DISK drive
> hdb: CD-ROM 36X/AKW, ATAPI CDROM drive
> ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
> hdc: QUANTUM FIREBALLP KA13.6, ATA DISK drive
> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> ide1 at 0x170-0x177,0x376 on irq 15
> hda: 10018890 sectors (5130 MB) w/418KiB Cache, CHS=10602/15/63, UDMA(33)
> hdc: 27067824 sectors (13859 MB) w/371KiB Cache, CHS=26853/16/63, UDMA(66)
> hdb: ATAPI 36X CD-ROM drive, 128kB Cache, DMA
> Uniform CD-ROM driver Revision: 3.08
> Partition check:
> hda: unknown partition table
> hdc: unknown partition table
> ...
> and a few lines later it panics because it can't find the root fs.

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/

Next message: Andreas Dilger: "[PATCH] 2.2.X fix ext2 socket filetype"
Previous message: Dave Cinege: "Re: [PATCH] 5 year old bug in main.c (initrd). Can this please be fixed?"
In reply to: Remi Turk: "2.3.99-pre9 and later don't recognize partition table"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

This archive was generated by hypermail 2b29 : Sat May 27 2000 - 15:12:26 EDT