Re: cdrecord and 'invalid field in parameter list' error

From: Jens Axboe (axboe@suse.de)
Date: Sat Sep 23 2000 - 18:32:45 EDT

  • Next message: safemode: "Re: Problem with 2.4.0-test9-pre6 seems to be SHM"

    On Sat, Sep 23 2000, Nathan Neulinger wrote:
    > CDB: 55 10 00 00 00 00 00 00 3C 00
    > status: 0x2 (CHECK CONDITION)
    > Sense Bytes: 70 00 05 00 00 00 00 12 00 00 00 00 26 00 00 8B
    > Sense Key: 0x5 Illegal Request, Segment 0
    > Sense Code: 0x26 Qual 0x00 (invalid field in parameter list) Fru 0x0
    > Sense flags: Blk 0 (not valid) error refers to data part, bit ptr 3
    > (valid) field ptr 0
    > cmd finished after 0.006s timeout 40s
    > cdrecord: Warning: using default CD write parameter data.
    > Mode Select Data 00 11 00 00 05 32 01 E4 08 00 00 00 20 00 00 00 00 20
    > 00 96 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    > 00 00 00 00 00 00 00 00 00 00 00 00 00 00

    This isn't a kernel bug, rather cdrecord doing something it shouldn't.
    Judging by the above sense and mode select data, cdrecord has set
    the fixed packet bit with a write type of trace-at-once and this
    isn't valid. So that's probably why the drive is complaining. 

    -- 
* Jens Axboe <axboe@suse.de>
* SuSE Labs
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/

    This archive was generated by hypermail 2b29 : Sat Sep 23 2000 - 18:38:57 EDT