No SCSI burning problem (was: Bug in "ide-pci.c")

From: Dax Kelson (dax@gurulabs.com)
Date: Sat Oct 07 2000 - 02:06:07 EDT

  • Next message: Dan Aloni: "Re: [PATCH] console palette fix"

    Jeff V. Merkey said once upon a time (Fri, 6 Oct 2000):

    >
    > Andre,
    >
    > BTW, how did your testing of the speed=4 problem with ide-scsi turn
    > out. We are still seeing the speed=2 problem on 2.4.0-pre9. I cannot
    > get the drive to burn clean unless the speed setting is cranked down to
    > speed=2.
    >
    > Jeff

    I just burned Red Hat 7.0 disk1 iso image at on a SCSI 4x burner without
    any problems. I have an IDE Plextor 12x burner at work, Monday I'll try a
    burn under 2.4.0-test9.

    distro: Red Hat 7.0
    kernel: 2.4.0-test9-pre8
    Cdrecord 1.9
    True SCSI Yamaha 4x burner

    (scsi0) <Adaptec AHA-2940UW Pro Ultra SCSI host adapter> found at PCI 0/16/0
    (scsi0:0:4:0) Synchronous at 8.0 Mbyte/sec, offset 15.
      Vendor: YAMAHA Model: CRW4416S Rev: 1.0j
      Type: CD-ROM ANSI SCSI revision: 02
    Detected scsi CD-ROM sr1 at scsi0, channel 0, id 4, lun 0
    Uniform CD-ROM driver Revision: 3.11
    sr1: scsi3-mmc drive: 16x/16x writer cd/rw xa/form2 cdda tray

    [root@localhost burn]# md5sum redhat-7.0-disc1.iso
    626b7d18033e320c27c8cd58cc37a288 redhat-7.0-disc1.iso

    [did a 4x burn]

    [root@localhost dkelson]# md5sum /dev/scd1
    626b7d18033e320c27c8cd58cc37a288 /dev/scd1

    -
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    Please read the FAQ at http://www.tux.org/lkml/

    This archive was generated by hypermail 2b29 : Sat Oct 07 2000 - 02:07:39 EDT