Newer motherboards / CPU's / hardware with Linux

From: Mike A. Harris (mharris@opensourceadvocate.org)
Date: Sat Oct 07 2000 - 12:50:35 EDT

  • Next message: Jeff V. Merkey: "Re: Tux 2 patents"

    I've been considering a possible upgrade now for quite a while,
    but wanted to wait until just the right time to do so. The
    purpose of an upgrade of course to get more performance out of
    the system.

    I got a freebie loaner upgrade recently from a K6-200 to a
    K62-350. I had to clock the chip to 300 for reliable operation
    however. After that, I noticed my hard drives were running at
    half the speed as they did previously. (5M/s instead of 10M/s)
    That is with identical hdparm settings and no DMA.

    I got Andre's latest IDE patches and applied, etc. and got my
    disks back to speed (VIA MVP3 chipset), but not to the speed I
    would have expected. Nonetheless it is much much better now, and
    a definite improvement over the last board/CPU I was using.

    After the problems I experienced though, I wondered just how many
    problems would I be in for if I bought a brand new Athlon 800
    system? Would it run like a P100 due to lack of Linux hardware
    support? After reading stuff on lkml here, I'm starting to think
    that such an upgrade would be a waste of money until maybe 2.4.10
    or so.

    So the question is basically: Is the upgrade worthwhile? Is
    2.2.x or 2.4.x compatible with Athlon CPU's or are there problems
    at all still? What about Athlon motherboards and chipset
    hardware? Can I expect the IDE chipset to work? Applying IDE
    patches is ok, but I just want to know that I'm going to get more
    than 10M/s out of the drives, and not fry them. Those are my
    main concerns, but I'd just like to know what the average
    developer thinks of the idea of forking out cash for a highend
    system right now and wether or not it is worth it yet.

    If not, I'd rather wait until things are integrated with the
    kernel proper and working. If it *IS* ready now, what sort of
    Athlon hardware is recommended for a developmental machine?

    TIA

    ----------------------------------------------------------------------
          Mike A. Harris - Linux advocate - Open source advocate
                  Computer Consultant - Capslock Consulting
                     Copyright 2000 all rights reserved
    ----------------------------------------------------------------------

    Need general help or technical support with Red Hat Linux 6.2? Join the user
    support mailing list by sending a message to "zoot-list-request@redhat.com"
    with the word "subscribe" on the subject line.

    -
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    Please read the FAQ at http://www.tux.org/lkml/



    This archive was generated by hypermail 2b29 : Sat Oct 07 2000 - 12:55:19 EDT