I get this when DMA is enabled:
Oct 20 15:39:07 cr753963-a kernel: hdb: timeout waiting for DMA
Oct 20 15:39:07 cr753963-a kernel: hdb: irq timeout: status=0x6e {
DriveReady DeviceFault DataRequest CorrectedError Index }
ide0: reset: success
Oct 20 15:39:07 cr753963-a kernel: hdb: DMA disabled
Oct 20 15:39:07 cr753963-a kernel: ide0: reset: success
It only happens when there lots of data is being transferred, or compiled
on the drive.. The drive status is this:
/dev/hdb:
Model=Maxtor 82560A4, FwRev=AA8Z2726, SerialNo=C40LTQGA
Config={ Fixed }
RawCHS=4962/16/63, TrkSize=0, SectSize=0, ECCbytes=20
BuffType=DualPortCache, BuffSize=256kB, MaxMultSect=16, MultSect=off
CurCHS=4962/16/63, CurSects=5001696, LBA=yes, LBAsects=5001728
IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 *mdma2
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Fri Oct 20 2000 - 18:36:16 EDT