problem with adding starfire driver to kernel 2.2.18

From: Nathan Neulinger (nneul@umr.edu)
Date: Sat Feb 10 2001 - 17:46:01 EST

  • Next message: Rik van Riel: "[PATCH] 2.4.0-ac8/9 page_launder() fix"

    I've seen this symptom in the past with updated tulip and eepro drivers.
    Basically, it appears that it detects the same card more than once. In
    the case of the below dmesg output - the machine has 1 tulip based card,
    and 1 Adaptec Quartet64. The eth[5-8] are bogus.

    In the past, if I remember correctly, so long as I didn't do anything to
    the bogus interfaces, stuff was fine, but it's a little disturbing.

    Note - I've added the module directly to the kernel (added the .o files
    in the drivers/net/Makefile, and the pci_scan/kern_compat stuff etc.)

    Any ideas on how I can correct this symptom?

    Moving to 2.4.1 isn't an option just yet, although I am considering it
    as I'm deploying new machines.

    -- Nathan

    eth0: Digital DS21143-xD Tulip rev 65 at 0xe000, 00:C0:F0:6B:61:BC, IRQ
    5.
    eth0: EEPROM default media type Autosense.
    eth0: Index #0 - Media MII (#11) described by a 21142 MII PHY (3)
    block.
    eth0: MII transceiver #1 config 1000 status 782d advertising 01e1.
    tulip.c:v0.92t 1/15/2001 Written by Donald Becker <becker@scyld.com>
      http://www.scyld.com/network/tulip.html
    eth1: Adaptec Starfire 6915 at 0xd0000000, 00:00:d1:ee:77:71, IRQ 11.
    eth1: MII PHY found at address 1, status 0x7809 advertising 01e1.
    eth2: Adaptec Starfire 6915 at 0xd0081000, 00:00:d1:ee:77:72, IRQ 9.
    eth2: MII PHY found at address 1, status 0x7809 advertising 01e1.
    eth3: Adaptec Starfire 6915 at 0xd0102000, 00:00:d1:ee:77:73, IRQ 10.
    eth3: MII PHY found at address 1, status 0x7809 advertising 01e1.
    eth4: Adaptec Starfire 6915 at 0xd0183000, 00:00:d1:ee:77:74, IRQ 5.
    eth4: MII PHY found at address 1, status 0x7809 advertising 01e1.
    starfire.c:v1.03 7/26/2000 Written by Donald Becker <becker@scyld.com>
     Updates and info at http://www.scyld.com/network/starfire.html
    eth5: Adaptec Starfire 6915 at 0xd0204000, 00:00:d1:ee:77:71, IRQ 11.
    eth5: MII PHY found at address 1, status 0x7809 advertising 01e1.
    eth6: Adaptec Starfire 6915 at 0xd0285000, 00:00:d1:ee:77:72, IRQ 9.
    eth6: MII PHY found at address 1, status 0x7809 advertising 01e1.
    eth7: Adaptec Starfire 6915 at 0xd0306000, 00:00:d1:ee:77:73, IRQ 10.
    eth7: MII PHY found at address 1, status 0x7809 advertising 01e1.
    early initialization of device eth8 is deferred
    eth8: Adaptec Starfire 6915 at 0xd0387000, 00:00:d1:ee:77:74, IRQ 5.
    eth8: MII PHY found at address 1, status 0x7809 advertising 01e1.
    starfire.c:v1.03 7/26/2000 Written by Donald Becker <becker@scyld.com>

    ------------------------------------------------------------
    Nathan Neulinger EMail: nneul@umr.edu
    University of Missouri - Rolla Phone: (573) 341-4841
    CIS - Systems Programming Fax: (573) 341-4216
    -
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    Please read the FAQ at http://www.tux.org/lkml/



    This archive was generated by hypermail 2b29 : Sat Feb 10 2001 - 17:47:29 EST